chrome rear shock absorbers suzuki gsx1000 gsx 1000 1982 no shroud Kawasaki Z800 If you have a weak

If you have a weak spark on your Honda CBR1000 then the coils could be the culprit and it's a good idea to get some new coils on the bike

This ignition coil has been manufactured to replace the original coil pack on a Honda VFR700 for the years and models shown above

Also ensure that any works completed are done so by a qualified and competent mechanic

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Triumph ST 955cc for the years and models shown above

Please check the measurements match your originals prior to purchase as some CB500 models have shorter mounting

chrome rear shock absorbers suzuki gsx1000 gsx 1000 1982 no shroud Kawasaki Z800 If you have a weakBrand new set of chrome rear shock absorbers to fit: Suzuki GSX 1000 S Katana (1982). This set of rear shocks is designed to replace the original factory shocks on a Suzuki GSX1000 for the years and models shown above. It has 335mm pin fork mounting points with no shroud. The top pin bush is 15mm, the bottom fork is 10mm M10 thread. (You may need to change the top bush to the required size). You will receive a bush kit with 2x 10mm, 2x 12mm and 2x