MC3093ST35 by Dixon Valve | Type B (Bauer Style) Quick Connect Fitting | 3" Size | Male with Machined Hose Shank | Galvanized Steel JDSTYLE_123196 Conformance: An exclusive item with

Conformance: An exclusive item with Danfoss

5mm 1168X4A 1/4" 10-32* 0

Buna-N O-Ring Thread P Thread T A 2246-2-4S 1/8-27 7/16-20 1

(SCFM at 90 PSI) SCVL2 1/4" x 1/4" 1/4" 23-29 SCFM SCVL3 3/8" x 3/8" 3/8" 30-36 SCFM SCVM3 3/8" x 3/8" 3/8" 39-47 SCFM SCVS3 3/8" x 3/8" 3/8" 52-65 SCFM SCVM4 1/2" x 1/2" 1/2" 70-78 SCFM SCVS4 1/2" x 1/2" 1/2" 80-96 SCFM SCVL6 3/4" x 3/4" 3/4" 72-88 SCFM SCVM6 3/4" x 3/4" 3/4" 92-108 SCFM SCVR6 3/4" x 3/4" 3/4" 112-128 SCFM SCVJ6 3/4" x 3/4" 3/4" 132-148 SCFM SCVS6 3/4" x 3/4" 3/4" 160-180 SCFM SCVH6 3/4" x 3/4" 3/4" 180-200 SCFM SCVL8 1" x 1" 1" 165-195 SCFM SCVM8 1" x 1" 1" 220-260 SCFM SCVS8 1" x 1" 1" 280-320 SCFM SCVH8 1" x 1" 1" 310-340 SCFM SCVL10 1-1/4" x 1-1/4" 1-1/4" 260-290 SCFM SCVM10 1-1/4" x 1-1/4" 1-1/4" 300-340 SCFM SCVS10 1-1/4" x 1-1/4" 1-1/4" 440-500 SCFM SCVH10 1-1/4" x 1-1/4" 1-1/4" 570-630 SCFM SCVL12 1-1/2" x 1-1/2" 1-1/2" 300-360 SCFM SCVM12 1-1/2" x 1-1/2" 1-1/2" 470-530 SCFM SCVX12 1-1/2" x 1-1/2" 1-1/2" 564-602 SCFM SCVS12 1-1/2" x 1-1/2" 1-1/2" 640-720 SCFM SCVH12 1-1/2" x 1-1/2" 1-1/2" 750-830 SCFM SCVL16 2" x 2" 2" 510-590 SCFM SCVM16 2" x 2" 2" 725-825 SCFM SCVS16 2" x 2" 2" 900-1050 SCFM SCVH16 2" x 2" 2" 1100-1200 SCFM SCVL24 3" x 3" 3" 1200-1400 SCFM SCVS24 3" x 3" 3" 2400-2700 SCFM SCVH24 3" x 3" 3" 2850-3050 SCFM

Installation: Cut tubing squarely and clean tube end thoroughly to remove burrs

MC3093ST35 by Dixon Valve | Type B (Bauer Style) Quick Connect Fitting | 3" Size | Male with Machined Hose Shank | Galvanized Steel JDSTYLE_123196 Conformance: An exclusive item withFeatures: Bauer style locks on the male side. Recommended for use with steel King Crimp Sleeves. Has a double pin locking lever for smooth closing action. Gasket included on female half. Each coupler is equipped with a safety pin to prevent accidental openings. Materials: Galvanized Steel Safety Notes: These fittings are not recommended for chemicals or any hazardous type materials where the possibility of leakage would result in health or